Hung m6 sp

I have a M6sl, turn it on screen comes up, after about 30 secs. get a another screen that says :

Status 0x00 TOUCH ERROR
posistion 0x00 response oxoo
[play]-calibrate [menu]-exit

after this buttons on front are dead, only thing I can do is power it off

I have tried formatting, low level formatting, firmware upgrades
nothing helps.

Any Ideas?

That's the calibration-screen which is displayed on M6 SP when you press the Enter button for 2 seconds.
It's useful if the touchpad does not respond or act like expected. In this case you simply press the Play button first and then the Menu button to return to the main menu.

If this screen appears without pressing the Enter button (and you can't exit pressing the Menu button), there seems to be something wrong with the Enter button under the touchpad (maybe it got stuck).

In that case you might have to open the player to see if you can (un)fix it.

Maybe you should first reset the player to the factory default settings (backup your files first), and if it doesn't help format the player and reinstall the firmware (just to make sure it's not a software problem).

Do you know of any therads on opening a m6sp.

Are you sure you have an SL? SL's supposedly do not have that calibration screen. If anything, try doing a firmware update first, a corrupt firmware could always be a cause. Make absoloutly sure you use the correct firmware for your player, look n the back of your player to make sure what version it is. Hope this helps!

I screwed up it's an sp, Originally I thought it was a firmware issue so I upraded the firmware to s2004.6, But I still get the screen after about 30 sec. I noticed after the upgrade the dane electric splash is gone so the firmware must have been updated.

I also noticed when I force it to shut down, because of the calibration screen, it updates the music library when I turn it on again. Sometimes it finishes updating, other times it stops in the middle of updating the library and turns off. Is this because the enter key is constantly being pressed

Any ideas on how to get a sp open? maybe it's just a stuck enter key.