Da_Vinci

http://ftp.meizu.cn/angelo/DFUTools.rar
This tool is for M6 or M6sl. I don't know if it works with M3.
many guys failed when they tried to rescue the player,it is not because the player is dead.it is because they didn't use DFU correctly.
But you should make sure the M6 is healthy in "hardware",if you crashed it or something,DFU will help nothing.
If the player dead just because upgrade or degrade fail or something.DFU can fix all,I am sure.
Let's GO!
STEP:
1.Please prepare a correct firmware.
2.Make sure the 'hold' key on M6 is unlocked.
3.copy 'M6.EBN' or 'M6sl.EBN' to the folder.
Tips:If it is a M6sl,edit the 'secdfu.ini' →→ edit 'M6.EBN' to 'M6sl.EBN'
4.run 'Secdfu.exe'.The 'download' button should be grey.
Tips:Make sure the M6 is detached wth PC now.
5.Reset the M6→→Press the 'Power\Play' button for 15 seconds.
Tips:Whether the screen displays nothing or not,just press the button.
6.After reset ,hold the 'power' button then press button 'M' and connect M6 to PC.Windows will detect your player as a DFU device.
Tips:Make sure you are holding both buttons firmly.
7.If detected,Congratulations;If not,repeat 4~6.

→→Now if it's a M6sl,you can detach it and press 'power'+'|<<'(backward) for 15 seconds to format the player.Then the PC will detect the M6sl normally.
Because the DFU driver doesn't support M6sl,so we cannot go on.(In my test,the driver doesn't work with M6sl,I think it's due to the new processor.)

8.Update the driver.Choose "Install from a list or specific location", then choose "Search for best drivers in these locations" and "Include this location in the search" and browse to the DFU Folder.
Then the 'download' button should be available.
9.Make sure you keep both 'M' and 'power' button pressed (MUST!) and then press 'download'.
10.disconnect from PC→→reset→→reconnect to PC→→copy correct resource.bin→→Upgrade.

DONE!

TIPS:If step7 is done but cannot proceed,try to format the player by pressing 'power'+'|<<' as mentioned above.

Astradam

Had a hard time following you, but thanks for the tut.

Da_Vinci

Sometimes my expression is not pure.
Hope it's not too obscure to understand.
Any questions just reply the post.

Creatoom

Hello Da Vinci

My SL id "dead" after upgrading with firmware "M6SL_2.004.4_english.rar"

You said "[SIZE=4]→→Now if it's a M6sl,you can detach it and press 'power'+'|<<'[/size](backward) for 15 seconds to format the player.Then the PC will detect the M6sl normally.
after the Meizu is connected to the computer.

After this manipulation ( 20 sec ) the PC don't detect the Meizu ( a sound "tudut" of deconnexion ? )

Can you help me,

Thanks for your topic ! ( I'm french, my english is too bad ! )

mbarry

Hi Creatoom and everyone else. I hope these directions are a bit more easier to follow. Search DFU Tools on the forum and download it. Be very careful never to let go of the M and Power button until you unplug your player. Hold Down The M and Power Buttons (DO NOT Let Go). Then plug your player in. It should be recognized as a DFU Device. If you have Vista, just open it up as a drive and put the M6.EBN and Resource.BIN files into the DFU Device. Make absolutly sure that it is the S.xxx.x version of firmware (If your player is the SP version, if not, make sure to use the T.xxx.x firmware), not the T.xxx.x version. Get one from Meizu's website (www.Meizu.en). If you have XP or lower, you have to use DFU Tools. Remember to Never Let Go of the M and Power button (I don't know how many poeple that have done this and ruined their players while running DFU). Make sure you have the M6.EBN file in the root DFU folder. Then open DFU tools. You then press Download and wait. That should have worked. Now un-plug the player and re-plug it. Open it up and drag the resource.bin of the same version firmware, i.e. if you used the S2.003.2 M6.EBN you have to use the S2.003.2 resource. Un-plug it and turn it on. If you are stuck at DFU, try it again. It took me 29 tries with DFU Tools before I fixed my player. I really hope this fixes it. If not, you could send it back to where you bought it for a refund or a replacement. I hope this helps. If you have any more questions, don't hesitate to PM me.

__________________
Thank God For Meizu Me!
Copyright ©By Mbarry all others who use this without Mbarry's personal permission will be subject to prosecution for copyright infringement.
If you are having trouble with your player, please visit this thread first: http://www.meizume.com/miniplayer-m6...ed-player.html and try the steps before you panic. Most likely you will be able to fix your player easily using the steps listed.

Players: Meizu Miniplayer M6 SP Dane-Elec $100 from Walgreens.com. iPod 4th Generation Monochrome White 20 GB, Free (Got it broken from school and fixed by tinkering with it). iPod Video 80GB Black. $75 bought broken from classmate for $50 and fixed screen for $25 (For a new screen, and iPod opening tools). Sandisk Sansa m240 2GB Black, $60 (A long time ago). Thompson TMS T-F10E 256MB Silver, $50 (Even longer ago).
Headphones: DX In-Ear headphones. $3.94 total from DX and free shipping. Targus ANC Headphones $1 from staples. Sometimes, Bose QC1 Headphones.
Remember to give either Positive or Negative reputation to people that have helped you, or to people who do not show respect towards you by clicking the under their Username.
My Quotes: "Anyone, no matter how mentally challenged, can achieve the impossible, if supplied with an adequate amount of time, and the right tools."
"An opinion is invaluble, and worth more than the greatest riches to a man, if held in all and complete honesty. However, an opinion that is held behind a veil of deceit is a man's greatest pitfall." -MBarry
Yes, Yes I know, I wrote a Novel...

mbarry

You could always go to the DFU Page in the forum...

Da_Vinci

Hi,Creatoom,mine is SL version too.
my m6sl can be detected as a 'DFU device'.After step 6.
If not detected,repeat the step 5 to 7.
Now if detected,press both keys and just format.
when formatting,there will be tips on the screen.if nothing shows,the format is not on the progress.

Creatoom

Hello mbarry !

My problem :http://creatoom.free.fr/Meizu/Meizu%20SL%20dfutools.jpg

I have Windows XP....I press "M + Play"...I connect USB....Windows detect my player as a DFU device...
When I tried instal drivers ( 8.Update the driver.Choose "Install from a list or specific location", then choose "Search for best drivers in these locations" and "Include this location in the search" and browse to the DFU Folder....)

Windows don't find drivers, and the buttom "download" of DFUtools has been Grey.

And the reboot ( 'power'+'|<<' ) have no effect.

Should I try several times to connected my PLayer ?

Tonight, I will try to connect my player on Windows Vista !

Da_Vinci

i don't think Vista would solve the problem.The driver doesn't work in XP is not the problem of your m6sl or OS,it is because the original driver is for M6 but not m6sl,so there is compatibility problem with M6sl.The driver doesn't recognise my m6sl too.

If you can modify the driver,you can try to modify the secdfu.inf.But it is out of my ability.

But the real problem is the XP detected your M6sl as DFU tools but you couldn't low format your M6sl.i think you should detach it and press both keys longer when your m6sl is detected as a DFU tool.

mbarry

Yes, if you have Vista it should be very simple, just drag and drop. Oh Make sure you are holding the M and Power button the WHOLE time. For more detailed instructions, refer to my post above.

Creatoom

Yes, I Tried several times to connect my player and holding "M and Power".....WIndows detect "Blues usb DFU device".....buttoms browse and download of DFUtools are not accesible...???

I connected my meizu on Vista, It's the same thing ! Vista said " download driver of USB device" but don't find this....

My poor Meiu it must be born dead !

Creatoom

HELP Me please !!!

The last solution : Keep my player 10 day without activity ???
It appears that it works for some


I'm desperate ! ( and French! my english is too bad ! Google word translation ! )

dxchen

i can't download the DFU tool for mini player SL...
help me...
i used whole day to try to fix the stupid problem..
till now still can't fix it..
zzzzzzzzzz

Creatoom

Hello,

A menber of forum en.meizu.com send me the DFU Tools SL version this morning.
I haven't try this, but I can send you this soft.

Give me your adress.

roryrudy

if u have vista, i heard it should detect it normally. if not, find a computer with xp and solve it.

Creatoom

DFU tools for M6SL exist !!!! ( DFU manager )

The solution here :

DFU Tools SL version disponible

arulselvan

hi my display has gone bad !!!!

Can we get replace that !!!!!

or Can we get LCD Display in the Market so that i can replace.

Thanks,
Arulselvan

lukyluke

does not work as it just has a constant white screen on

Creatoom

Hello Lukyluke !

The topic for Meizu M6 SL version :
Found Working Dfu Tool For M6sl

If you don't downloaded the DFU tools for Sl version ( DFU manager), is here :
Public - Windows Live SkyDrive

Good luck !

lukyluke

thank you cretoom. but the problem is that i dont know what my model is
the sn number is: mnt104gfgtscmo185.

so what model is this? sp/tp/sl?
i have not got a clue. but again thank you for the reply i reallly appricaite this as no other person has replied.

if you can email me the dfu for this model and the proper firmware i would be greatfull.
email me please on
-please use pm-

thanks again.