Want a Touchpad M6

i'm desperate, i really need a touchpad because mine it's crazy, can't use the player like this. So i'm looking for a working touchpad

uhh and how do you plan on replacing it?

Try hard resetting the player. And if this doesn't work there should be a menu to adjust the touchpad, get there by holding [Enter] for a few seconds in the main menu.

Originally Posted by Job

uhh and how do you plan on replacing it?

removing the actual touchpad and putt working one?

Lol don't do this, try the stuff in my post above.

Originally Posted by Pascallo92

Lol don't do this, try the stuff in my post above.

ok, i'll backup all files and do that. I don't think it will work because the touchpad works by itself :P

Originally Posted by zeba5

removing the actual touchpad and putt working one?

goodluck with that!
if you pull it off we will live to hear how you did it

The only man mad enough to pull open their M6 for actual FIXING (not to play around) is Madman - as the name implies. Maybe ask him for some advice.

How do you adjust the touch pad for the M6, when i go to main menu a Touch Error screen appears and has [Play] Calibrate and [Menu] Exit, and Position and response, but how do you adjust

To open the calibration window hold down the enter button. When the calibration window opens press the power\play button for a second or so and then slide your thumb up and down the the touch strip. Then press the Menu button to exit, your touch pad should then be recalibated.

There are some images of the touchstrip dismantled HERE

Thank you madman, is the any way to adjust the sensitivity. It is real sensitive, hard to keep from overshooting the runway

It is not possible to adjust the sensitivity but there are a few different ways to navigate.

If you place the flat of your thumb quite firmly on to the touch strip (without actually press hard enough to activate any of the buttons) you should be able to control slide navigation quite accurately.
If you want to scroll short distances as in the Main Menu or to adjust volume just tap the touch pad top and bottom to move up or down one entry at a time.
If you want to quickly scroll long lists, touch and hold top and bottom of the touch strip will give rapid scrolling up or down.
Also in long lists pressing << >> will move you from top, middle to bottom of the list in either direction.

Originally Posted by iversonjack

The only man mad enough to pull open their M6 for actual FIXING (not to play around) is Madman - as the name implies. Maybe ask him for some advice.

Uhhh... I'm trying to take 2, possibly 3 bad boards and create one working one. My M6 is already torn open and I took the battery and everything apart, and put the battery back on and everything, and tried DFU tools while it was open still.

I tear stuff open and fix them all the time. :D

You could also try to downgrade/upgrade...


You said its hard ware but its also many software because the software has to regonice wich side you are moving... so that could also be wrong!

the hard reset didn't work and i have the last firmware. aghrrrrrrr miniplayer sucks. Next week i'm going to buy a 4gb se 950. I though this mp4 would have better quality than generics but it broke in a few months :S and it wasn't my fault

Did you try to recalibrate yet?

I have a touchpad for sale. Message me for details