[Official] FW 0.9.6.9 - 06.02.2010 (w/ New UI)

ohh boy so many problems here

@unmarques: try a restart, and clean your regstry with m8sprite or complety a new RegReset

@Metalking: correct settings from your provider?

@nbibi: hmmm, don't know why? think theres no solution, u have to downgrade the fw, sorry dude

I have install this firmware, for now everything seem to be good just the phone become slower than before. Like the CPU load is high, something like that.

seluz,

I had a new regreset at restart pressed M+Power button and doesn´t work

Originally Posted by cmdv

MetalKing - Are you sure you have the correct GPRS/EDGE settings for VodaItaly? Since you are not able to send/receive MMS and Gmx doesn't work then it appears you have conx issues.

List of GPRS Network Settings for M8

In that Topic there isn't any configuration for Vodafone Italy...I've tried several settings for GPRS but no luck.

i have a new problem all sounds is low now (music, video ...)
just after clear registry sound became more that before
a solution ?

excuse me i miss a word

just after clear registry sound became more LOW that before
a solution ?

Originally Posted by MetalKing

In that Topic there isn't any configuration for Vodafone Italy...I've tried several settings for GPRS but no luck.

There's a thread over at XDA-Developers that had some guidance:

VODAFONE ITALY MMS & WEB settings... [Archive] - xda-developers

reading through it I think the following may work:

1) APN = mms.vodafone.it (everything else is default)
2) Gateway = 10.128.224.10
3) Server = http://mms.vodafone.it/servlets/mms
4) Port number = 9201

Originally Posted by cmdv

There's a thread over at XDA-Developers that had some guidance:

VODAFONE ITALY MMS & WEB settings... [Archive] - xda-developers

reading through it I think the following may work:

1) APN = mms.vodafone.it (everything else is default)
2) Gateway = 10.128.224.10
3) Server = http://mms.vodafone.it/servlets/mms
4) Port number = 9201

Thanks! Now I'm looking for GPRS settings.

Guys,
These are the MMS settings for iPhone for USA TMobile, I use it and it works just fine, may be the TMo USA users can try these as well and see if this helps...

Go thru the whole text...
you will find some things new not discussed before...
Remember, this is fior iPhone ( iPhone Haters-- Keep your cool... this is just Info)
HOW TO SET UP YOUR APPLE IPHONE FOR T-MOBILE INTERNET AND PICTURE MESSAGING





11-25-2009 06:04 AM
Here is some helpful info for setting up your Iphone with T-Mobile.

You Should be able to make calls and do normal text messaging on your iPhone once you put your T-Mobile sim in it, as long the iPhone is unlocked. Be careful with plugging it into itunes or updating the software on your phone, as this will likely relock the phone!

If you do not already have an internet plan, call T-mobile or log into your T-mobile online account and make sure you have the Smart Phone Web feature, this is the one that is set up to work for the Iphone. Once you have a Internet data plan on your account, here’s how to set up the internet on your iPhone:

1. From the Main Menu, tap Settings.
2. Verify that Wi-Fi is set to Off -- this will ensure that no wi-fi signals are interfering with your Internet access. To take advantage of local wi-fi at a later time, feel free to go back and turn this setting On; just make sure to turn it Off again when you are done using the wi-fi network.
3. Tap General Settings, then tap Network.
4. Turn Data Roaming On -- this will allow your iPhone to locate T-Mobile’s data network.
5. If you see a setting for 3G, turn it Off -- the iPhone cannot currently connect to T-Mobile’s 3G network, and this setting will interfere with its attempt to connect to our EDGE network for service.
6. Tap Cellular Data Network (this setting may be labeled EDGE instead on older versions).
7. In the APN field, enter either epc.tmobile.com (or internet2.voicestream.com if that doesn't work) -- this tells T-Mobile which version of our Internet network you want to connect to.
8. Leave the Username and Password fields blank -- T-Mobile will assign this information based on your SIM card information.
9. Return to the Main Menu and open Safari to browse the Internet.

It can sometimes take 2 to 48 hours for Internet service to begin after adding the service to your account.


Also, the data plan associated with your iPhone comes with Free Unlimited T-Mobile HotSpots. To log in, use the following:

Username: ( Your 10-digit Cell Phone Number by default. This will be the number of the phone with the data plan.)
Password: ( The last four digits of your Social Security Number by Default. This will be the last four digits of the social security number of the primary account holder.)

This should enable you to log into WiFi hotspots and browse the internet on your iPhone!

If you are interested in adding Picture Messaging to your iPhone, here are the settings you’ll need to set it up. There are two ways to do picture messaging on the iPhone, the first is primarily for first generation iPhones and 3G iPhones that have not upgraded to the 3.0 firmware.
If you are unsure whether or not you have the 3.0 firmware you can navigate to Settings – General – About and view your firmware version under “Version”.

First generation iPhones and 3G iPhones that do not have the 3.0 firmware require the use of a 3rd party application for picture messaging. These settings should work just the same in any application you find for picture messaging.

1. Navigate to the Settings option of whichever program you’re using..
2. Enter the following information, these should be the only settings the program needs:
   1. MMSC: 216.155.174.84/servlets/mms
   2. Proxy: 216.155.165.050:8080
   3. APN: wap.voicestream.com
   4. Username: [Leave blank]
   5. Password: [Leave blank]
3. Tap Save.

For 3G iPhones that have been updated to the 3.0 firmware, here are your settings:

1. Go to the Main screen.
2. Tap Settings.
3. Tap General.
4. Tap Network.
5. Tap Cellular Data Network.
6. Enter the following information under the MMS section.
7. Enter wap.voicestream.com into the APN field. Backup setting: epc.tmobile.com
8. Leave the Username field blank.
9. Leave the Password field blank.
10. Enter 216.155.174.84/servlets/mms into the MMSC field
11. Enter 216.155.165.50:8080 into the MMS Proxy field.
12. Leave the MMS Max Message Size field blank.
13. Leave the MMS UA Prof URL field blank.
14. Press the Home button to return to the main screen of the phone.
15. Turn the phone off and back on to put the settings into effect.
16. You should now be able to send/receive Picture Messages.

Alternate MMS setup (if first way doesn’t work):

1. Go to the Main screen.
2. Tap Settings.
3. Tap General.
4. Tap Network.
5. Tap Cellular Data Network.
6. Enter the following information under the MMS section.
7. Enter epc.tmobile.com into the APN field. Backup setting: epc.tmobile.com
8. Leave the Username field blank.
9. Leave the Password field blank.
10. Enter mms.msg.eng.t-mobile.com/mms/wapenc
11. Leave the MMS Proxy field blank
12. Leave the MMS Max Message Size field blank.
13. Leave the MMS UA Prof URL field blank.
14. Press the Home button to return to the main screen of the phone.
15. Turn the phone off and back on to put the settings into effect.
16. You should now be able to send/receive Picture Messages.

Originally Posted by LVL

Go to settings --> system --> Date and Time

Thanks m8, it works like this, of course, but NOT when going to Clock --> Edit: nothing is available to be edited, and I'm pretty sure in past FW (maybe not with new UI) you could manage to adjust time, date and place like this.

Why having an edit button if you can't edit anything... that's what I call a bug.

Originally Posted by nbibi

i have a new problem all sounds is low now (music, video ...)
just after clear registry sound became more that before
a solution ?

Maybe the sound-volume of the entire M8 has been reduced. You can change that in the sound settings, set it to 100%. It has probably been resetted when you did the registry clear.

Originally Posted by PierreHenry

Thanks m8, it works like this, of course, but NOT when going to Clock --> Edit: nothing is available to be edited, and I'm pretty sure in past FW (maybe not with new UI) you could manage to adjust time, date and place like this.

Why having an edit button if you can't edit anything... that's what I call a bug.

No it's not a bug, you manage date and time in setting, the clock is only if you want to add different clock so if you add many clock you can edit them and delete them

Hi guys, for those who were using the past leaks, is there any changes from the last one ?

not many visible changes but since they fixed bugs till midnight there have to be some changes

919263 - Here are my Tmo-usa settings:

1. APN: wap.voicestream.com OR epc.tmobile.com
2. Username: [Leave blank]
3. Password: [Leave blank]
4. Proxy: 216.155.165.050
5. Port: 8080
6. Server: 216.155.174.84/servlets/mms

These pretty much agree with what you grabbed from iPhone support page. And it is what I use on my HTC Touch HD. But MMS doesn't work on M8.

After 12 sites reading about the new official FW i decided for my self that this is still a leak and i will stay at the last FW with old UI. It makes no sense to me to try this out.
I am getting more and more disappointed from Meizu.

thx for the software..
i just installed it..
and so far so good..
i upgraded it from 0.9.3.18
and it really awesome for me

just want to explore it more..

thx a lot

how do you install the firmware?

how do you install the firmware?

Originally Posted by robert@

how do you install the firmware?

How To: Upgrade Firmware on the Meizu M8