Advanced WiFi configuration with server certificate

I need an advanced WiFI configuration for to access the WLAN at my university. Usually, the WM6 program SecureW2 (Downloads - SecureW2 Personal Client | Dynamic Security Solutions) is used for the acess, but I got an error message, that my Meizu M8 is not supported. Is there any possibility to configure manually, especially to integrate a server certificate?
I need the following options:
WPA2 Enterprise, AES -> EAP-Typ: SecureW2 TTLS -> the server certificate, which has to be imported somehow with authentification method PAP

Any idea how to solve this, by either installation of the secureW2 or by manual configuration?
Thanks for any tipps

KJ

If the WiFi is not blocked by itself, you should be able to connect to it, find the default gateway. Type the ip in opera and fill in the passwords.
But this won't work, probably since you need 'SecureW2'.

WM6 apps are not supported, the M8 runs on Windows CE 6.0, its a little different, some WM6 apps work. These are build on Windows CE 5.0, which is supported by either WM6 and WinCE 6.0.

With the Desktop / system application I was able to add the certificate. I also found a Secure W2 cab file, which was installed on M8 without any error message.
But now I have to access the program Secure W2 or a system window in which I can configure the settings fpr the connection . I should klook like this:

Any idea, where I can find this?

I can do that in Settings/WLAN/Other

My problem is to find this "setting" icon. Usually, in WM6 you press start and then there will be the option Settings.
I do not mean the regular icon system -> setting etc. I need the windows display in my previous posting.

But where is it on a M8? I can not find it anywhere.

KJ

documents =>windows\control.exe

Can you post a link to the .cab file? I would like to try it out on my school's secure wireless network!

Here's the cab:



KJ

I have a problem with my wlan in my school. All my friends have got normal access to the wlan network, but i cant connect.. It loads, and loads, but when it ends, im not connected there is no protection, no key etc... what could i try to do? =)

PS: im from germany =)

Nobody have this problem ?Oo

Originally Posted by KateJoss

With the Desktop / system application I was able to add the certificate. I also found a Secure W2 cab file, which was installed on M8 without any error message.
But now I have to access the program Secure W2 or a system window in which I can configure the settings fpr the connection . I should klook like this:

Any idea, where I can find this?

Originally Posted by BobbyQ

I can do that in Settings/WLAN/Other

What BobbyQ means is that you can go to Settings > WIFI > and press Other where you can access all of those settings you posted on the screenshot. Just try it and see if that's what you're looking for.

I've installed the .cab file, but can't use it when I go to Settings/WLAN/Other

also in the control pannel I can't set up a connection with wlan where to choose the certificate, anyone can help me ?

on home page, click "settings" icon.
Once menu comes open, click WiFi or WLAN.
It will slide over and your should see WiFi with the on/off switch next to it, make sure it is blue with the one on it.
The blue circle of annoyance should start spinning, wait till it finishes.
When this is done, click on the "other" tab.
In this tab, you can enter in the Name of the school's network.
Ask a specialist at your school what type of security it is(or try them all)
enter in the password
Fill any other options out, and you should be fine.

any better?

the security is TTLS

so what to do when that options isn't there