Guide: Fixing your "Bricked" Player

hello,
i recently got a bricked meizu m6 sp (1gb). it was stuck on the "loading..." screen and i was able to recover it via dfu tools. i was pretty content with everything until i tried to load a larger amount of music onto it. it seems now that whenever the file-amount surpasses 800mb the player goes "kaputt". it doesn't respond anymore: writing breaks up with e/a errors, player freezes (soft shutoff works though). afterwards the drive isn't recognized by windows anymore, most of the times it even falls back to the loading...-screen freeze. is there less than 800mb of files loaded on the flashdrive the player works just fine. i tried several firmwares, all with the same result. any suggestions, what the problem might be. thanks.

Try re-formatting the drive as NTFS in Windows, see if that helps.

I have to say thank you, thank you, thank you very much my friend! i revived the M6SP of a friend of mine's with your guidebook!


added:

I have tried in vain with the guide tools for DFU (with 1.9 firmware) sent by one of the admins from the Meizu official forum, the 2.004 and 2.002 versins also failed me. Just when it comes to the moment that I thought all hopes were gone, I tried your method and it at first looked the same failure but a miracle afterwards appeared that i was able to do a low level format by holding down two keys, and since that I knew that this little piece of %#$# was revived.

VOILA my story, thanks again mon amis!

No problem, glad I could help!

Thanks mbarry, i tried you steps with my dead m6 sp player it's doen't worked.if possable can any one please post a video on DFU.it will be very useful.

How do I get it so that it's in english? It's in a different language and I can't figure it out. Thanks

You mean the language in the M6 menu?

You'll find the answer in the FAQ.

I have done all steps, and nothing happens - my player still can't work. But if i just plug player to comp.,as usual, it starts to charge. I remember that previos time, when my player was bricked, i read somewhere about using NAND utils in DFU, and fixed my m6sl.

i ned your help

Can you see the player's charging screen? If so, maybe you are just not holding down the power button long enough to start it.

Originally Posted by mbarry

Can you see the player's charging screen? If so, maybe you are just not holding down the power button long enough to start it.

I holding power button enough to start it. Now i think that my battery have been broken, cuz i can perform Low-level formating or simple Formating when i connect my M6 with charger, but when i disconnect cable during the process, m6 turns off. I have warranty, so I'll go to service-center and wail untill my player will be repaired.

G'day Barry,
Just wanted to say thankyou for the fix for my brick. Very happy camper know that its working again.

Cheers mate

flew like a piercing, so I decided to flash as before but the scramble through the DFU error failed to verify device firmvare not know what to do until the accident had not noticed that the Hold on / off and DFU began to flash but the boot image 2, it hung, I waited but then got tired of waiting I broke! tried again holding down the play button and the menu but the PC is not detected! </span>! I press play the screen flashed when pressed again, even this effect it was not, I do not know what to do as now to flash player? please help!

does anyone have dfu tools for TS version?

Originally Posted by Fuzz1986

does anyone have dfu tools for TS version?

I've found it! here is a link if anyone else wants to get it. depositfiles. com/files/2yz9ltacy

M Barry
Thanks man I owe you one. the very first step cleared up my problem. This
Meizu is the greatest. I have a unique set up you might like. I have it mounted on the underside of my baseball caps brim. Works super. Pause,next, volume up or down without looking. Both hands free to work, No wires hanging(routed through the crown) Remove hat FLIP and the earphones (taped to the headband over the ears) go inside the hat and it barely shows. Really handy. Thanks again ---------- JIM

G'Day M Barry
could you give me a help her? i have followed your guide book to fix my dead meizu. its all done, but when i start the player it go with upgrading resources for a couple of minute and it go dead again. have done the soft, hard and very hard reset but nothings happen. really appreciate for the kind help. thanks

i have a problem here with my M6sl..it doesnt response to any of what i am going to do..when i press the play button it doesnt response when it is suppose to power on..so i decided that may be its battery is low..when i plug it on a charger it does nothing..doesnt charge anymore..when i plug it on computer the computer made a sound the a device failed to connect..how could i fixed it if it fails to connect in my computer?

everytime i plug it on my computer still the same..it has black screen, no responsse!!!

any idea whats happening to my player???

could any one help me???

is there a posible way to make my device connect to my computer???

pls, i need an ans.. immediatly if posible..

forgot something...i have stalled already DFU tools on my computer but still the same problem occur!!

You have to use DFU Tools correctly, both of you. Just follow the instructions.

I have a 8 GB SP Miniplayer that is not coming back on. Black screen, battery is full, popped it open and measured it
No buttons respond,
Device is not recognized by windows, tried 5 machines not as a drive or in DFU mode.

Any tips on how to get it revived and if not anyone interested in the parts

M