Another Dead Miniplayer ? ;-(

My player works perfectly..... but some day i wanna upgrade my soft (standard metchod) to T2003.2 i read a lot of topics in forum and downloaded correct firmware (TP) after upgrading i saw resources message so i copied it in to meizu.... and after restart i saw.....WHITE SCREEN ;( i have tried all possible key combinations (resets, formats...) but nothing works.... so i used DFO Tool, downloaded T1.009 firmware (someone said it's best for DFU Tool) and my Meizu was alive again... so i traie again to upgrade my firmware standard metchod to T2003.2 ver .. and my meizu dies again.... but this time DFU doesny help.... i Have tried all posible firmwares... Meizu is recognized in DFU ... DFU upgrade it properly (progressbar goes to the end, i keep pressed M+ON) .. but still WHITE SCREEN ... no idea

The white screen is normal during upgrade.

What you can do now is try DFU Tools some more, it might take a few times.

Yeah, ikt took me 29 tries with DFU for my player to work again.

With which FW ver should i try ? I have almost all t1.001, t1.002...... t2003.2.

after about 100 tries i was to ANGRY to try more ... i just opened my MEIZU and cleaned it with swap+alcohol , check all tape-connecions i can saw .... i closed it again and.... i saw a GREEN SCREEN :D i just copied resource and my M6 LIVES AGAIN ..... but there is also another problem... there is something wrong with navigation keys... << seems to bo still pressed becouse i always hear 'click' sound and my menu is scroling up even when i dont touch my mini player....
PS. i updated firmware from 1.009 to 1.010 and still this same...

it sounds like you put it together wrong (the button is pressed on)

skladam go juz z 10 raz i ciągle to samo....

trzeba bylo nie rozkladac

jagbym go nie rozłożył i nie przezcyscił to nie miałbym miniplayerea tylko latarkę;/ z reszta wydaj mi się ze wszystko robie poprawnie a weim co robie (studiuje elektornikę